To check the quality of clothing, first measure the length, chest circumference, collar and sleeve length, shoulder width, trousers length, hip circumference and waist circumference according to the model marked on the clothing to see whether the size specification is accurate, and the error should generally be less than 1.5%. After checking the specifications, it is important to check the internal quality of clothing. The method is visual inspection, ruler measurement and strict verification. Conduct visual inspection before fitting.

(1) Top: check from front, back and side. In the front, observe whether the two sharp corners of the collar are symmetrical; There should be no height or skew, and it should be straight and straight, the size of the collar should be close to the neck, and the collar should not be exposed; Whether the pocket position is symmetrical, whether the shoulder blade is wide and comfortable, whether the back fork is flat and flat, and whether the shoulder seam is straight, whether the clothes and sleeves are smooth and uniform, and whether there are uneven or concave defects. Then check whether the sleeves are consistent, and whether the seam is straight and smooth.

(2) Pants: can be inspected in three steps: plane, upper and three-dimensional. For plane inspection, select to align and flatten the seam, check whether the seam is straight without lifting crack, whether the side seam is flat, whether the pocket cushion is not exposed, whether the leg of the pants is comfortable and consistent in size, and whether the pocket is not lifted. Then pull up one leg of the pants to see whether the lower stop seam is aligned, straight, without lifting crack, whether the intersection with the back seam is straight, whether the lower stop seam of the leg is aligned, straight, without lifting crack, whether the intersection with the back seam is straight, and whether the lower stop seam of the leg is lifted. Check the upper part, mainly to see whether the waist is straight, not fat or tight, whether the pleats and seams are symmetrical, whether the back pocket is comfortable and flat, whether the small lapel is flat and flat, whether the position is accurate, whether the placket and inner lapel are qualified and smooth; Whether the zipper is flexible; During the stereoscopic examination, lift the waist of trousers according to the wearing shape, and check whether the front and back seams are round and smooth, the four squares are straight, and whether the pants and seams are flat and not cracked.